Lenape Replacement Towel Bars
Out of Stock

Lenape 24-Inch White Replacement Towel Bar 13/16″ Square with Spring Ends

(24 customer reviews)


Key Features
Item: Towel Bar
Overall Dimesions: 13/16 inches square x 24 inches long
Finish: White
Material: Plastic
Includes: 2 – Spring Loaded Adjustable End Caps

Out of Stock

Product Description

This 24″ replacement towel bar with spring ends is 13/16″ Square white plastic. Press the spring ends, center in the existing towel bar post openings and release. The complete step by step instructions in the Product Documents show the installation and how to measure the bar to cut it to your specific length (fine tooth saw required). In addition, the following video shows how easy it is to install your spring ends replacement towel bar.

The replacement towel bar is the, often copied, original Re-Place-A-Bar. Imported.

Now also available in Black!

Replacement Towel Bar Installation Instructions

Installation requires sitting one spring end in the towel bar bracket, depressing the opposite spring end with a finger, positioning it in front of the opposite towel bar bracket and then releasing the spring end.
This process is for replacing a towel bar where the ceramic or porcelain posts or holders cannot be removed from the wall.

To start if your bar is still in place you can use a hacksaw to cut the bar to remove it. Next you will need to take a tape measure and measure between your posts from inside to inside. Once you have that measurement you will need to order the Next size up replacement bar.
If its 12” or less, you will order an 18” bar. If it is over 12” but fewer than 24” you will need a 24” bar. If it is over 24” but less than 36” you will need to order a 36” bar.
You will notice that the ends have a spring in them. You will want to remove one spring end. Next place the side with the spring still in it into one of the holders then compress the spring and take a pencil and make a mark just on the bar just inside of the opposite holder.
Now that we have a mark where we need to cut it we can take a hacksaw and cut it. Once it is cut to our desired length we will reinstall the spring end . With both spring ends installed we can now install the new bar. Place one end into one of the ceramic posts and push the bar that way to compress the spring. Next take your finger and depress the spring on the opposite side and then slide it into the opposite ceramic post letting the spring out.
With the bar now in both ceramic posts move the bar back and forth within the posts to let the bar center itself. You will need to do this so that way it is not relying on the spring ends to hold the weight of whatever you place on the bar. With the bar centered that’s it you have just installed a replacement towel bar for a towel bar that uses ceramic posts or holders.

Plum Street Pottery Easy Return Policy

We are consumers as well as an online retailer so our goal is no less than what we expect as consumers. You must be completely satisfied with your purchase. We take pride in the quality of the products we sell and offering great customer service is our top priority. If you are not completely satisfied with your purchase, please follow the guidelines detailed below and we will be happy to help you return your purchase.

As soon as possible open and inspect your order to confirm the correct items were shipped and they are in good condition. If there are any damages please report them immediately so we can file a timely claim with our carrier. Call Customer Service at 1-800-367-5644 or send us an email to sales@plumstreetpottery.com.

Merchandise can be returned within 30 days of purchase. Refunds will be issued to the original form of payment (credit card, Pay Pal, etc.). The original shipping charges will be deducted from the refund unless the return is the result of an error by Plum Street Pottery or the product is defective. Please note bundled items need to be returned with all components for a full refund.

Keep the original packaging until you are sure you are keeping your order. All returns must be made in the original packaging with the original packaging materials.


All returns need to be sent to Plum Street Pottery 600 Plum St. Trenton, NJ 08638.

Credit will be issued at the time the merchandise is received in good condition in our warehouse unless the return is due to a manufacturing defect.

Preparing your Return

• Note the reason for the return on the packing list and place it in the original carton with the product.

• Pack the item carefully in the original packaging.

• Address your package to Plum Street Pottery, 600 Plum St. Trenton, NJ 08638.  Keep a copy of the tracking number on this label for future reference.

• Bring the package to any UPS or USPS location near you.

*Please note that, depending on the form of payment tendered, it may take 2-10 business days after your credit is applied for it to post to your account.

Return Policy Exceptions

Damaged Items and Shortage Claims: Any damaged or missing items must be reported to Customer Support within 10 days of delivery by calling 1-800-367-5644. The sooner we are notified the sooner we can file a claim with the carrier. Thank you!

• Special order returns are subject to 15% restocking fee. Cancellations may be subject to 15% restocking fee.

• Plum Street Pottery reserves the right to limit or refuse to accept the return of merchandise at any time and for any reason.

How to Install Ceramic Bathroom Accessories

It is important to read the instructions on How to Install Ceramic Bathroom Accessories before starting your project.

(Things You Will Need • Drill with a carbide tip • Cooling oil • Masking tape • Chisel • Hammer • Margin trowel • Tile adhesive)

The ProSeries is designed to fit in a space between ceramic tiles. When installing the field tiles, a piece or pieces of tile are left out so the slight recess in the back of the accessory makes contact with the wall. A typical tub soap dish with a mounting surface area of approximately 4” x 6” requires the removal of 1 ½ – 4” x 4” tiles. We recommend un-sanded thin set mortar mortar. Mix the un-sanded thin set mortar as directed on the package and apply it evenly to the back of the accessory, it is important that the entire gap between the accessory and wall is evenly filled with un-sanded thin set mortar mortar. Expect some mortar to squeeze out the sides. This can easily be wiped off. Place the piece in the opening and apply some pressure with a slight wiggling motion. Some un-sanded thin set mortar will squeeze out, simply clean around the edge. Tape the accessory to the wall with duct tape. After the un-sanded thin set mortar dries completely, approximately 24 hours, caulk the edges with a good quality bath and tile caulk.

Step by Step Instructions: Install Ceramic Bathroom Accessories

Step 1

Hold the ceramic shower shelf, ceramic soap dish or ceramic towel bar against the wall to determine the location you want to install it. If you are just installing the tiles in the shower, leave this area open and continue installing the tiles around it and skip steps 2, 3 and 4.

Step 2

Place masking tape over any tiles that will need to be removed. The masking tape will help the drill bit bite into the glaze on the tiles without slipping.

Step 3

Dip the end of the drill bit into a bottle of cooling oil and place the bit against the tape on the tile. Make four or five holes into a tile to create the shape of a X. Drill only through the tile, not through the underlayment. Watch the drill carefully as you work, if it begins to smoke or turn red, dip the bit back into the cooling oil. Repeat for the remaining tiles to be removed.

Step 4

Remove the masking tape from the tile. Position a chisel at a 45 degree angle on one of the holes in the tile. Hit the chisel with a hammer to break up the tile into several pieces. Continue chiseling out the tiles all the adhesive behind them have been removed.

Step 5

Cover the back of the accessory with a layer of un-sanded thin set mortar using a trowel. It is important to fill the entire gap between the accessory and the wall with the un-sanded thin set mortar mortar. Press the accessory into the opening between the tiles. Use long strips of masking tape to help hold the shelf in place while the un-sanded thin set mortar is drying. Let the un-sanded thin set mortar cure for 24 hours.

Step 6

Take a piece of one of the tiles you removed with you to the store to purchase additional tiles if you need to fill in extra space around the accessory. This will be necessary if the accessory only needed a partial tile removed. For example corner shelves require less then a full tile. Removing a partial tile will likely crack the remaining half, remove the entire tile and replace half.

Step 7

Cut the tiles to fit in the space next to the accessory on a tile wet saw for the cleanest cut or a standard tile cutter. Remember to leave a space for a grout joint around each tile.

Step 8

Apply a layer of adhesive to the back of the tile or tiles and press them into place around the accessory. Allow the un-sanded thin set mortar to dry for 24 hours. 9 Grout the replacement tiles if necessary by spreading grout into their joints with a grout float. Wipe away any excess grout with a damp sponge and let the grout dry for 24 hours. 10 Squeeze a line of caulk around the perimeter of the accessory to seal its edges. Smooth out the caulk with a wet index finger. Allow the caulk to dry for 24 hours. (Periodically inspect the caulk around the accessory to be sure it remains water-tight.

Visual Guide on How to Install Ceramic Bathroom Accessories

The following YouTube video provide visual aides in the installation process.

24 reviews for Lenape 24-Inch White Replacement Towel Bar 13/16″ Square with Spring Ends

  1. Anonymous (verified owner)

    Shipped quickly and the items were exactly as described.

    (0) (0)
  2. Yvonne E. (verified owner)

    (0) (0)
  3. Wendy J. S. (verified owner)

    Excellent! The only thing that would have made it perfect is if it would have been available in cream and/or chrome.

    (0) (0)
  4. Anonymous (verified owner)

    (0) (0)
  5. Cynthia Seay (verified owner)

    I am very pleased with the product

    (1) (0)
  6. Lawrence Michetti (verified owner)

    Haven’t received my order yet. It was supposed to arrive on July 28 th.

    (0) (0)
    • SBielawski

      I tracked your order and see that it was finally delivered on August 4th. Our apologies for the late delivery. We have found that USPS has experienced delays due to the pandemic.
      Thank you for your order.
      Steve Bielawski
      Plum Street Pottery

  7. DAVID D. (verified owner)

    Installation was easy

    (0) (0)
  8. Deatra Neary (verified owner)

    (0) (0)
  9. Randy S. (verified owner)

    These were exactly what I was looking for. They matched my 55+ year old fixtures perfectly and I received them in 4 days! Very Satisfied!!

    (0) (0)
  10. Anonymous (verified owner)

    replacements for broken plastic towel bars- great!

    (0) (0)
  11. Mark (verified owner)

    Arrived early and exactly as described. Perfect.

    (0) (0)
  12. Glenn W. (verified owner)

    Item was exactly as described. The replacement towel bar was identical to the 41 year old original.

    (0) (0)
  13. steve (verified owner)

    I previously broke my towel bar and couldn’t find a 13/16″ bar, so I replaced it with a thinner one. Well, I broke it as well. This time I found the Lenape 11/16″ It fits well and is stronger.
    I did buy 2 in anticipation of my breaking this one as well, but I’ll have to try harder to do so.

    (0) (0)
  14. Paul B. (verified owner)

    Fit perfectly in the 60 year old fixture, can’t ask for more than that.

    (0) (0)
  15. June D. (verified owner)

    Perfect towel bar replacement. Easy to cut and install. Highly recommend.

    (0) (0)
  16. Obiageli (verified owner)

    I cut mine too short but even my husband agreed that this is the best quality available in the market

    (0) (0)
  17. Anonymous (verified owner)

    (0) (0)
  18. Daniel Rieben (verified owner)

    found the product on website. It was adequately described. Received in timely manner and fit perfectly

    (0) (0)
  19. Valerie Lynn (verified owner)

    Perfect fit if you cut it correctly! Had to order a second since I measured wrong. Don’t measure from the outside edges of the ceramic holders or the bar will hang from the spring ends. Add extra length so the bar is inside the holders.

    (0) (0)
  20. Anonymous (verified owner)

    This was exactly the part I needed and it was very easy to cut to size and fit in place. So glad I found it!

    (0) (0)
  21. Marjorie G. (verified owner)

    Perfect solution for my 1930’s square towel bar.

    (0) (0)
  22. Ronald Leonard (verified owner)

    (0) (0)
  23. Beryl (verified owner)

    This replacement towel bar was exactly what I needed, and the price was excellent! I ordered it on a Monday and received it on Wednesday, just in time for my handyman to trim it to size. Thank you so much for the terrific service, it’s greatly appreciated!

    (0) (0)
  24. TOMMY BOURQUE (verified owner)

    item fits perfectly

    (0) (0)
Add a review

Your email address will not be published. Required fields are marked *

Plum Street Pottery Shipping Policy

Plum Street Pottery Shipping Policy offers Free Shipping for orders $50 and over(tax not included, if applicable)! Sales tax (when applicable) is excluded from the subtotal when calculating the value of your order for our Free shipping offer. Sorry but we do not ship to Hawaii and Alaska.

Shipping Rates for Orders under $50.00

$1.00 to $5.00 – $4.99

$5.01 to $12.50 – $6.75

$12.51 to $19.99 – $10.50

$20.00 to $29.99 – $14.50

$30.00 to $40.99 – $16.50

$41.00 to $49.99 – $19.50

Our standard shipping method is ground and we will ship your order via any of the major mail carriers, including FEDEX and the United States Postal Service.

FAST Shipping

Most orders will leave our warehouse within 48 hours excluding Saturday, Sunday and Holidays. Orders that ship direct from our suppliers usually ship within 48 to 72 hours.

FEDEX, USPS Tracking

You will receive an email with your FEDEX or USPS tracking information when your order has been picked up at our warehouse.

Please carefully inspect your order as soon as it arrives. Report any damages so we can promptly file a claim with our carrier. Claims must be made within 30 days of receiving your order.

You may also like…

  • Toilet Paper Holder Roller, Spring Loaded Chrome Replacement Toilet Tissue Roller

    Lenape Chrome Metal Toilet Paper Roller, Spring Loaded Replacement Toilet Tissue Roller

    Estimated delivery by February 28Add to cart