The white ceramic towel bar is 24″ and designed for a tile thin-set application. The ceramic is high fired to 2120°F and is impermeable to water and stains. The fact that it will not stain, corrode or tarnish means it only requires a damp rag or sponge to clean it. Why worry about metal accessories when your ceramic bathroom accessories will literally last a lifetime.
The white plastic towel bar is 24″ long and can be cut to your requirements with a fine tooth saw. Installation instructions are provided in our Product Installation guide.
Nominal Dimensions: Each post is 4 1/2″L (Vertical) x 2 1/8″W (Horizontal) x 3 1/2″H (Projection) x 5/16″D
Nominal Wall Opening Dimensions: 4″L (Vertical) x 1 1/2″W (Horizontal) x 5/16″D
Towel Bar: 24″L white plastic. Use a hack saw to cut to your exact length.
Installation: Thin set
Material: Ceramic <1/2% water absorption
Manufactured in Thailand
The back view of the ProSeries tile thin-set wall mounted bathroom accessory. The flange creates a clean trim.
Plum Street Pottery Easy Return Policy
We are consumers as well as an online retailer so our goal is no less than what we expect as consumers. You must be completely satisfied with your purchase. We take pride in the quality of the products we sell and offering great customer service is our top priority. If you are not completely satisfied with your purchase, please follow the guidelines detailed below and we will be happy to help you return your purchase.
As soon as possible open and inspect your order to confirm the correct items were shipped and they are in good condition. If there are any damages please report them immediately so we can file a timely claim with our carrier. Call Customer Service at 1-800-367-5644 or send us an email to email@example.com.
Merchandise can be returned within 30 days of purchase. Refunds will be issued to the original form of payment (credit card, Pay Pal, etc.). The original shipping charges will be deducted from the refund unless the return is the result of an error by Plum Street Pottery or the product is defective. Please note bundled items need to be returned with all components for a full refund.
Keep the original packaging until you are sure you are keeping your order. All returns must be made in the original packaging with the original packaging materials.
By UPS, USPS
All returns need to be sent to Plum Street Pottery 600 Plum St. Trenton, NJ 08638.
Credit will be issued at the time the merchandise is received in good condition in our warehouse unless the return is due to a manufacturing defect.
Preparing your Return
• Note the reason for the return on the packing list and place it in the original carton with the product.
• Pack the item carefully in the original packaging.
• Address your package to Plum Street Pottery, 600 Plum St. Trenton, NJ 08638. Keep a copy of the tracking number on this label for future reference.
• Bring the package to any UPS or USPS location near you.
*Please note that, depending on the form of payment tendered, it may take 2-10 business days after your credit is applied for it to post to your account.
Return Policy Exceptions
Damaged Items and Shortage Claims: Any damaged or missing items must be reported to Customer Support within 10 days of delivery by calling 1-800-367-5644. The sooner we are notified the sooner we can file a claim with the carrier. Thank you!
• Special order returns are subject to 15% restocking fee. Cancellations may be subject to 15% restocking fee.
• Plum Street Pottery reserves the right to limit or refuse to accept the return of merchandise at any time and for any reason.
How to Install Ceramic Bathroom Accessories
It is important to read the instructions on How to Install Ceramic Bathroom Accessories before starting your project.
(Things You Will Need • Drill with a carbide tip • Cooling oil • Masking tape • Chisel • Hammer • Margin trowel • Tile adhesive)
The ProSeries is designed to fit in a space between ceramic tiles. When installing the field tiles, a piece or pieces of tile are left out so the slight recess in the back of the accessory makes contact with the wall. A typical tub soap dish with a mounting surface area of approximately 4” x 6” requires the removal of 1 ½ – 4” x 4” tiles. We recommend un-sanded thin set mortar mortar. Mix the un-sanded thin set mortar as directed on the package and apply it evenly to the back of the accessory, it is important that the entire gap between the accessory and wall is evenly filled with un-sanded thin set mortar mortar. Expect some mortar to squeeze out the sides. This can easily be wiped off. Place the piece in the opening and apply some pressure with a slight wiggling motion. Some un-sanded thin set mortar will squeeze out, simply clean around the edge. Tape the accessory to the wall with duct tape. After the un-sanded thin set mortar dries completely, approximately 24 hours, caulk the edges with a good quality bath and tile caulk.
Step by Step Instructions: Install Ceramic Bathroom Accessories
Hold the ceramic shower shelf, ceramic soap dish or ceramic towel bar against the wall to determine the location you want to install it. If you are just installing the tiles in the shower, leave this area open and continue installing the tiles around it and skip steps 2, 3 and 4.
Place masking tape over any tiles that will need to be removed. The masking tape will help the drill bit bite into the glaze on the tiles without slipping.
Dip the end of the drill bit into a bottle of cooling oil and place the bit against the tape on the tile. Make four or five holes into a tile to create the shape of a X. Drill only through the tile, not through the underlayment. Watch the drill carefully as you work, if it begins to smoke or turn red, dip the bit back into the cooling oil. Repeat for the remaining tiles to be removed.
Remove the masking tape from the tile. Position a chisel at a 45 degree angle on one of the holes in the tile. Hit the chisel with a hammer to break up the tile into several pieces. Continue chiseling out the tiles all the adhesive behind them have been removed.
Cover the back of the accessory with a layer of un-sanded thin set mortar using a trowel. It is important to fill the entire gap between the accessory and the wall with the un-sanded thin set mortar mortar. Press the accessory into the opening between the tiles. Use long strips of masking tape to help hold the shelf in place while the un-sanded thin set mortar is drying. Let the un-sanded thin set mortar cure for 24 hours.
Take a piece of one of the tiles you removed with you to the store to purchase additional tiles if you need to fill in extra space around the accessory. This will be necessary if the accessory only needed a partial tile removed. For example corner shelves require less then a full tile. Removing a partial tile will likely crack the remaining half, remove the entire tile and replace half.
Cut the tiles to fit in the space next to the accessory on a tile wet saw for the cleanest cut or a standard tile cutter. Remember to leave a space for a grout joint around each tile.
Apply a layer of adhesive to the back of the tile or tiles and press them into place around the accessory. Allow the un-sanded thin set mortar to dry for 24 hours. 9 Grout the replacement tiles if necessary by spreading grout into their joints with a grout float. Wipe away any excess grout with a damp sponge and let the grout dry for 24 hours. 10 Squeeze a line of caulk around the perimeter of the accessory to seal its edges. Smooth out the caulk with a wet index finger. Allow the caulk to dry for 24 hours. (Periodically inspect the caulk around the accessory to be sure it remains water-tight.
Visual Guide on How to Install Ceramic Bathroom Accessories
The following YouTube video provide visual aides in the installation process.
Plum Street Pottery Shipping Policy offers Free Shipping for orders $50 and over(tax not included, if applicable)! Sales tax (when applicable) is excluded from the subtotal when calculating the value of your order for our Free shipping offer. Sorry but we do not ship to Hawaii and Alaska.
Shipping Rates for Orders under $50.00
$1.00 to $5.00 – $4.99
$5.01 to $12.50 – $6.75
$12.51 to $19.99 – $10.50
$20.00 to $29.99 – $14.50
$30.00 to $40.99 – $16.50
$41.00 to $49.99 – $19.50
Our standard shipping method is ground and we will ship your order via any of the major mail carriers, including FEDEX and the United States Postal Service.
Most orders will leave our warehouse within 48 hours excluding Saturday, Sunday and Holidays. Orders that ship direct from our suppliers usually ship within 48 to 72 hours.
FEDEX, USPS Tracking
You will receive an email with your FEDEX or USPS tracking information when your order has been picked up at our warehouse.
Please carefully inspect your order as soon as it arrives. Report any damages so we can promptly file a claim with our carrier. Claims must be made within 30 days of receiving your order.